background image

warnings

IMPORTANT: 

Save these instructions for the Local Gas Inspector’s use.
INSTALLER: 
Please leave these Installation Instructions with the 
unit for the owner.
OWNER: 
Please retain these instructions for future reference.

This appliance was designed for ease of installation and 
operation.  However, we recommend that you read all sections 
of this manual before beginning installation and that your range is 
installed by an approved gas installation technician, OR IN THE 
COMMONWEALTH OF MASSACHUSSETTS A LICENSED 
PLUMBER OR LICENSED GAS FITTER, capable of reviewing 
and performing the manufacturers installation checklist included in 
your information packet. 

The installation of appliances assigned for manufactured (mobile) 
home installation must conform with the Manufactured Home 
Construction and Safety and Safety Standard, Title 24 CFR, Part 
3280 or, when such standard is not applicable, the Standard for 
Manufactured Home Installations, ANSI/NCSBCS A225.1, or with 
local codes as applicable.  

The installation of appliances designed for Recreation Park 
Trailers must conform with state or other codes or, in the 
absence of such codes, with the standard for Recreational Park 
Trailers, ANSI A119.5.

The appliance, when installed, must be electrically grounded in 
accordance with local codes or, in the absence of local codes, with 
the National Electrical Code, ANSI/NFPA 70

The appliance and its individual shutoff valve must be disconnected 
from the gas supply piping system during any pressure testing of that 
system at test pressures in excess of 1/2 psi (35 kPa).

The appliance must be isolated from the gas supply piping system by 
closing its individual manual shutoff valve during any pressure 
testing of the gas supply piping system at test pressures equal to or 
less than 1/2 psi (35 kpa).

DO NOT

 store or use gasoline or other flammable liquids or 

vaporous products in the vicinity of this appliance. 
• Smother flames with a close fitting lid, or any metal tray. 
• Turn OFF the burner.  Be careful to prevent burns.  If the flames do 
not extinguish, immediately evacuate and call the fire department.
• NEVER pick up a flaming pan.  By doing so, you may be burned.
• DO NOT use water or a wet dishcloth on fire.  A violent steam 
explosion will result.  

USE FIRE EXTINGUISHER ONLY IF:

• You have CLASS ABC extinguisher 
and you know how to operate it. 
• The fire is small and contained in the 
area where it started.
• The fire department has been called.
• You can fight the fire with your back to 
the exit.

WARNING!
Disconnect Power before installing.  
Before turning power ON, be sure that 
all controls are in the OFF position.

IMPORTANT!
Installation must conform with local 
codes or, in the absence of local 
codes, with the National fuel Gas 
Code, ANSI Z223.1/NFPA 54.

NOTE:

WARNING! 
If the information in this manual is not 
followed EXACTLY, a fire or explosion 
may resuly, causing property damage, 
personal injury or death.  

DO NOT store or use gasoline or other 

flammable vapors and liquids in the vicinity 

of this or any other appliance.

**WHAT TO DO IF YOU SMELL GAS**

DO NOT try to light any appliance.

DO NOT touch any electrical switch.

DO NOT use any phone in your building.

IMMEDIATELY call your gas supplier 

from a neighbor's phone.  Follow the gas 

supplier's instructions.

If you cannot reach a gas supplier, 

call the fire department.

INSTALLATION AND SERVICE must be 

performed by a qualified installer, service 

agency or the gas supplier. 

ii

Summary of Contents for PSCT364B























Reviews: