CAPINTEC, INC.
CRC
®
-712MH
CHAPTER 7
CLEANING AND MAINTENANCE
GENERAL
This chapter provides the information necessary for the user to perform the basic
maintenance of instrument cleaning, fuse replacement, and general preventative
maintenance. There are no internal adjustments or calibration settings that may be done by
the user within the conditions of the warranty.
REFER ALL SERVICING TO A QUALIFIED SERVICE REPRESENTATIVE !
It is recommended that periodic (every five years) re-calibration of the CRC
®
-712MH be
performed by Capintec’s Authorized Service Center to guarantee the instrument’s high
reliability is maintained. Contact Capintec’s Authorized Service Center in Pittsburgh for
servicing or re-calibration at 1-800-227-6832.
CLEANING INSTRUCTIONS
WARNING !
TO AVOID ELECTRICAL SHOCK OR DAMAGING OF THE CRC
®
-712MH, NEVER GET
WATER OR LIQUIDS INSIDE THE CHAMBER OR THE READOUT ENCLOSURE.
DO NOT USE AN AEROSOL DISPENSER TO SPRAY THE EQUIPMENT WITH ANY
CLEANING SOLUTION OR LIQUID.
TO AVOID DAMAGING THE CASE OR DISPLAY SCREEN, DO NOT USE AROMATIC
HYDROCARBONS, CHLORINATED SOLVENTS, OR METHANOL-BASED CLEANING
SOLUTIONS.
If the CRC
®
-712MH Readout or Chamber requires cleaning, wipe down with a damp cloth; do
not use solvents or aerosol cleaners.
For the printer (if included), refer to the printer owner’s manual for proper cleaning
procedures.
January 08
CLEANING AND MAINTENANCE
7 - 1
