5
Using crimp closed end connectors
The only difference with « figure c » is the ground wire using Crimp Closed End Connectors
instead of linking them via the female terminals. Please refer to « figure b » for the
principle.
Pictures
2.8mm Crimp Terminals
Female Spade Connector
4.8mm Crimp Terminals
Female Spade Connector
Crimp Closed End
Connectors
4.8 Quick
Disconnect Sleeve
2.8 Quick Disconnect
Enclosure
2.8 Quick Disconnect Sleeve
SANWA / SEIMITSU
Are you using the 5-pin wire harness for joytick ?
In this case, please use this picture as reference to connect the joystick wires to your CPS1 connector
Full guide available to build your own 5-wire harness
ALL THESE SPARE PARTS ARE AVAILABLE ON GATENINETY.COM
