6
ENG
GENERAL INFO
The device
Canyon Jondy CNE-KW44
– children's smartwatch, with SIM-
card support and wireless connection to a smartphone via a branded app
Canyon Life
.
Models:
CNE-KW44PP (pink), CNE-KW44BL (blue); CNE-KW44GB
(green).
DEVICE DESCRIPTION
WARNING
! The device is not intended for children under 4 years old.
Functions
: two-way audio calls; voice chat; emergency call. Remote
monitoring: control of a safe geo-fence; movement history. Music player;
USB mode to transfer files from/to PC; camera; photo album; calculator;
pedometer; stopwatch; alarm clock; games.
Specifications
: DC 5.0 V / 1.0 A; 128 MB (RAM), 192 MB (ROM).
Processor: ASR3603S, 832 MHz, single-core ARM; Cortex-R5. Screen:
1.4 inches, 240×240 pixels, IPS, touch screen. Network: 2G, GSM
850/900/1800/1900 mA∙h; GSM 900: 33 dBm, GSM 1800: 30 dBm;
3G/WCDMA B1/2/5/8; 4G/LTE B1/2/3/5/7/8/20; 23 dBm. GPS: L1, 1575;
42 MHz (C/A-code); TD1030 (GPS + GLONASS). Sensitivity of GPS-chip
reception: trace −165 dBm, capture −148 dBm. Camera: 0.3 MP. Built-in
TF card: 512 MB, non-removable. Compatibility: Android 5.1 and newer,
iOS 12.0 and newer. Body: plastic, 43.5×16×23.5 mm, IP67. Strap:
silicone, 20×230 mm. Weight: 48 g. Battery: lithium polymer, 3.7 V,
700 mAh, non-removable. Full charge time: 3.5 h. Operation time: in active
mode up to 2 days; in standby mode up to 5 days. Operating conditions:
temperature 0...+40 °C, humidity 0–80 %. Storage conditions: temperature
0...+40 °C, humidity 0–80 %.
Accessories
: Smartwatch Jondy CNE-KW44, magnetic charging cable
Pogo pin (4 pin) with USB Type-A (length 60 cm), a set of tools to install the
card nano-SIM (tweezers, screwdriver); quick start guide.
APPEARANCE
(fig. A, B, C).
1
. Button 1.
2
. Button 2.
3
. Speaker.
4
. Camera.
5
. Screen.
6
. Microphone.
7
. SIM card slot.
8
. Electrical
contacts for charging and data transfer.
9
. Charging cable.
If you have any questions before returning your device to the
store, please email us at
or you can chat
with us at the website
canyon.eu/user-help-desk
.
PREPARATION FOR OPERATION
Charging
. Charge the device before using it for the first time. To do this,
connect the charging cable (9) to the electrical contacts (8) as shown in
figure B and connect it to the power supply.
WARNING
! The power supply output should not exceed 5.0 V 1.0 A (power
adapter not included).
