background image

5

  

 

 

.

SAFETY WARNINGS

  

 The pressure regulator and hose assembly provided with the appliance must be used. 

The replacement part must be the same as the part specified by manufacturer. 

 To attach the LP gas cylinder please refer to the Gas Connection section on page 9 

and perform the leak test on page 10. 

Children and adults should be alerted to the hazards of high surface temperatures 

 

and should stay away to avoid burns or prevent clothing ignition.  

Young children and pets should be carefully  supervised when they are in the area of

the appliance. 

Any guard or other protective device removed for servicing the appliance must be 

 

replaced prior to operation.  

Clothing or other flammable materials should not be hung from the appliance. 

 Do not use the appliance if any part has been under water. Immediately call a qualified 

technician to inspect the appliance and to replace any part of the control system and any 

 

gas control which has been under water.  

 LP gas supply cylinder to be used must be constructed and marked in accordance with 

the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT).  

 The cylinder supplies system must be arranged for vapour withdrawal and the cylinder 

must include a collar to protect the cylinder valve. 

 Use only 20 lb (9 kg) LP gas cylinders. 

 Do not burn wood or any other materials in this appliance. 

 The appliance must be isolated from the gas supply piping 

system by closing its individual manual shutoff valve during 
any pressure testing of the gas supply piping system at test 
pressure equal to or less than 1/2 PSI (3.5 kPa). 

 Properly place the hose out of pathways where people may trip over it or in areas where

 there may be subject to accidental damage. 

 The burner must be replaced prior to the appliance being put into operation if it is 

evident that the burner is damaged. The replacement burner must be the same as the

part specified by manufacturer. 

 To clean the appliance, including the burner, please refer to Cleaning and 

Maintenance on page 12.

Summary of Contents for 088-0733-8














Reviews: