background image

3. Provided with a cylinder connection device compatible with the connection for the appliance. 

used in a building, garage or any other enclosed area. 

SPECIFICATIONS

 

  

 

 

SAFETY WARNINGS

 When the appliance is connected to a fixed-gas system, the installation must conform  

with local codes, or in the absence of local codes with the National Fuel Gas Code, ANSI 
 Z223.1/NFPA54; International Fuel Gas Code, Natural Gas and Propane Installation Code,  
CSA B149.1; or Propane Storage and Handling Code, B149.2, as applicable.  

 The LP gas supply cylinder used must be: 

1. Constructed and marked in accordance with the U.S. Department of Transportation (D.O.T.) 

 

Specifications for LP Gas Cylinders, or the Standard for Cylinders, Spheres and Tubes for 
Transportation of Dangerous Goods and Commission, CAN/CSA-B339 as applicable.

 

2. Provided with a listed overfill prevention device. 

 Always place the appliance on a firm and level surface.  

 Solid fuels shall not be burned in this gas appliance. 

 The appliance shall be used only outdoors in a well-ventilated space and shall not be 

 When in use, keep the appliance area clear and at  least 40" (101.6 cm) from 

combustible materials, gasoline and other flammable liquid and vapours. Do not use the 

 

appliance under overhead, combustible surfaces. Certain items or materials, when stored
under the appliance or nearby, will be subjected to radiant heat and could be damaged.

 Inspect the hose assembly and burner prior to each use. If there is evidence of excessive 

abrasion or wear, or if the hose or burner is damaged, it  must be replaced by an

 

 Inspect the gas connections of the appliance prior to  each use. Do not to operate the 

 

Product Name 

Bangari 

Model No. 

088-0733-8  

Rated Heat Input 

50,000BTU/hr 

 

e

n

a

p

o

r

P

l

e

u

F

Gas Supply 

20 lb LP gas cylinder

Manifold Pressure 

11" wc

Orifice Size (diameter)  2.18 mm 

Gas Supply Pressure 

Max. 250 PSI 

4

S

P

E

C

IF

ICA

T

IO

N

S

S

AF

E

T

W

A

R

N

IN

G

S

unit if there is a gas leak. Have the appliance inspected annually by a qualified service 
person.

 appropriate part from the manufacturer.  

MODEL NO. 088-0733-8 

fire table

Summary of Contents for 088-0733-8














Reviews: