10
MODEL NO. 064-3156-0
10
MODEL NO. 064-3156-0
CAR
E
AN
D MAI
N
T
E
NAN
C
E
Replacing the Remote Control Battery
When the remote control stops operating or its range seems reduced, it is time to replace the battery. Note:
The battery should be removed if the product is to be left unused for a long time.
Caution:
Non-rechargeable batteries must not be recharged. Exhausted battery is to be removed from the
product.
1. The battery compartment is located on the back end of the remote control.
2. Press the small tab inward as you slide the battery door open and remove the old battery.
3. Insert a new CR2025 lithium battery (not included), ensuring the polarities of the battery match the inside of
the battery compartment.
4. Re-insert the battery door.
For more information about collection and recycling of used batteries, please contact your local municipality,
your waste disposal service or the point of sale where you purchased this item.
Disposal of Used Battery
A battery may contain hazardous substances that could be dangerous to the
environment and human health.
This symbol marked on the battery and/or packaging indicates that used battery
shall not be treated as municipal waste. Instead it shall be left at the appropriate
collection point for recycling.
By ensuring the used battery is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health. The
recycling of materials will help to conserve natural resources.
WARNING:
Make sure the power is turned off before proceeding. Any electrical repairs
or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and local codes.
WARNING:
Do not use this fireplace if any part of it has been under water. Immediately call
a qualified service technician to inspect the fireplace and replace any part of the electrical
system.
WARNING:
Disconnect power before attempting any maintenance or cleaning to reduce
the risk of fire, electric shock or personal injury.
WARNING:
During any service of this appliance, the power to the unit must be turned off.
First turn the main power switch to the “OFF” position. Then remove the electrical plug
from the wall outlet.
If repairing or replacing and electrical component or wiring, the original wire routing, colour
coding and securing locations must be followed.
WARNING:
Electrical outlet wiring must comply with local building codes and other
applicable regulations to reduce the risk of fire, electric shock and injury to persons.
