![background image](http://html1.mh-extra.com/html/canvas/064-3156-0/064-3156-0_assembly-instructions-manual_3981484005.webp)
5
IM
PORT
A
N
T S
A
FET
Y
IM
F
O
RM
A
T
ION
C
A
D
B
Grounding Pin
Grounding Pin
Grounding Means
Adaptor
Metal Screw
Cover of
Grounding
Box
Electrical Specifications
Electric Connection
A 15 A, 120 V, 60 Hz circuit with a properly-grounded outlet is required. Preferably, the fireplace will be on a
dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to
blow when the heater is in operation. The unit comes standard with 6’ (1.8 m) three-wire cord, exiting from
the rear of the fireplace. DO NOT exceed the current rating of the current tap. ALWAYS plug heaters directly
into a wall outlet/receptacle. NEVER use with an extension cord or relocatable power tap (outlet/power
strip).
This heater is for use on 120 V. The cord has a plug as shown below. See illustration for grounding
instruction. An adaptor as shown in Fig. C is available for connecting three-blade grounding type plugs
to two-slot receptacles. The green grounding plug extending from the adaptor must be connected to a
permanent ground such as a properly-grounded outlet box. The adaptor should not be used if a three-slot
grounded receptacle is available.
Voltage
120 V AC, 60 Hz
Amps
11.7 A
Watts
1,400 W
There is a thermostat device provide inside of the unit. If the inner temperature overheats or abnormal
heating occurs, the thermostat device will cut off power supply to prevent damage or risk of fire.
DO NOT slide insert on top of wood to avoid scratching wood surface.
DO NOT place any objects on top of insert and top air intake vents as this will cause unit to overheat and
can cause a fire.