3
95
English
Problem
Possible cause
Solution
The speaker system
does not turn on
automatically�
1� The standby function is factory set to NSB�
The system must be turned on manually�
1� Switch the standby function to AUT�
2� The device has been switched off via the
“ON / Standby” button of the remote control
or the “Power” button of the TV remote
control (when using the IR learning function)�
2�1� Switch on the speaker system via the “ON / Standby”
button of the remote control and wait until it automati-
cally switches to the standby mode, next time�
2�2� Delete the “Power” button of your TV remote from the
speaker system to prevent it from switching off together
with your TV�
3� The signal at the Line, Balanced or USB input
is too low�
3� Increase the output level on your source device�
Speaker system
switches off
automatically�
1� The standby function ECO, AUT or NSB is
activated�
1� Select the standby function MAN (see Page 73)�
2� The infrared command for STB has been
learned incorrectly�
2� Learn the infrared command for STB again (see Page 71)�
Speaker system
does not turn off
automatically�
1� The standby function MAN is activated�
1� Activate the standby function ECO, AUT or NSB
(see Page 73)�
2� The standby function AUT or NSB is activated
and the source device also transmits a carrier
signal in standby mode (optical or coaxial
digital input, only)�
2� Disconnect the source device from the mains or
manually switch off the speaker system�
Summary of Contents for Smart Vento 9
Page 38: ...3 39 Deutsch 3 Klicken Sie nun auf Ausgabe und w hlen Sie den Canton Lautsprecher aus...
Page 52: ...31 English S m a r t V e n t o 9 S m a r t V e n t o 3...
Page 89: ...3 91 English 3 Now click on Output and select the Canton speaker...
Page 105: ...3 71 English Notes 180129_Manual_Canton_DM60_D_E_RZ_0316 indd 71 22 03 18 11 54...
