3
71
English
SLP (Sleep Timer)
Activating this option puts the device in standby mode after a pre-set period of time� 15, 30, 45 and 60 minutes can be
chosen as shutdown times� OFF disables the function� To set a specific shutdown time, proceed as follows:
1
Select the SLP function as described in the chapter SYS (System Setup)
and choose it using the navigation buttons “ ” and “ ”�
2
After you press the “+” button, OFF appears in the display� Keep on pressing the
“+”
button until the display shows the desired shutdown time�
Note:
After the shutdown process, the sleep timer is automatically disabled�
That means that each time the device is switched on, the shutdown time has to be set again�
IRM (Infrared Menu)
In this menu you will find all of the functions that are relevant to infrared learning�
IRL (Infrared Learning)
The system can learn the infrared code of your TV remote control, allowing you to control the functions of the speaker and the TV with
a single remote control� Any button on the TV remote control can be learned by the speaker� When you select buttons, ensure that the
commands for the speaker and for the TV unit do not conflict� We recommend that you disable the internal speakers of the TV set once
you have connected the speaker system� Have the remote control of your TV set ready�
To teach the infrared codes, proceed as follows:
1
Select the SYS menu as described in the chapter SYS (System Setup) and choose the IRM function using
the navigation buttons “ ” and “ ” and press OK.
2
Use the navigation buttons “ ” and “ ” to select the IRL function, then press OK.
3
IRL will flash in the display�
4
Press the desired function on the Canton remote control, e�g� “+”� Now the function you’ve chosen will appear in the display, e�g� “V+”�
5
Within 20 seconds, press the button that you want to program on the TV remote control� If transmission was successful, OK will light up
in the display and you can begin programming the next function, e�g� you can continue with “–”� If FAI appears in the display, the trans-
mission has failed and you have to repeat steps 4 to 5�
6
If you would like to exit the menu, you have to press the M button and hold it until FIN appears in the display�
Summary of Contents for Smart Vento 9
Page 38: ...3 39 Deutsch 3 Klicken Sie nun auf Ausgabe und w hlen Sie den Canton Lautsprecher aus...
Page 52: ...31 English S m a r t V e n t o 9 S m a r t V e n t o 3...
Page 89: ...3 91 English 3 Now click on Output and select the Canton speaker...
Page 105: ...3 71 English Notes 180129_Manual_Canton_DM60_D_E_RZ_0316 indd 71 22 03 18 11 54...
