Canton Musicbox S, User Manual

Page: 22 / 28

42 43
English English
LED status display
LED Colour Meaning
Power steady blue start process (up to 10s after switching on)
Power steady blue Battery charge status 90­100%
Power Flashing blue Battery charge status 20­90%
Power Flashing red Battery charge status <20%
Power Rapid flashing red (2x/sec.) error
Bluetooth
®
Flashing blue no connection
Bluetooth ® steady blue Connection established
Bluetooth ® Flashing white Pairing process
Bluetooth
®
/auX Off standby
auX steady blue input selected
Mute Flashing white Mute function activated
Mute 5 seconds steady white Maximum volume
Centerpad Flashing blue left or right true Wireless pairing process
Centerpad steady blue left stereo mode left channel
Centerpad steady blue right stereo mode right channel
Centerpad steady blue left and right Party mode
Note: in battery operation all leds are switched off after approx. 5 seconds to
save power consumption. Only the led display of the selected input remains active.
Problem Possible cause Solution
musicbox does not turn on. 1. Battery is fully discharged (e.g. after long
storage).
1. Charge the battery.
2. device temperature is lower than 0°C or higher
than 60°C. an internal protective circuit pre­
vents operation.
2. the musicbox should only be used at moderate
temperatures (see safety instructions, page 33)
no sound reproduction. 1. no audio output from Mobile device. 1. Volume set to “Zero” (please refer to mobile
device instructions).
2. Jack incorrectly connected or faulty (only in
auX operation).
2. Check the connection between the mobile
device and the musicbox. Change the signal
cable if necessary.
3. the musicbox is set on mute (led flashes
white).
3. increase the volume on the musicbox by pres­
sing vol+ button.
4. the protective circuit of the integrated amplifier
has been triggered (through overload or exces­
sive temperatures).
4. Reduce the volume and prevent the device from
overheating.
sound reproduction too soft. Volume of the musicbox or the mobile device set
too low. note: With some android devices and in
auX operation the volume between the musicbox
and the mobile device is not synchronised. 1. increase the volume on the musicbox using the
volume button “+”.
2. increase the volume on the mobile device.
Troubleshooting
Here is an overview of the most common problems. if you have any further questions please contact your
Canton dealer, call our service Hotline on +49 (0) 6083 287­0 or send us an e­mail to info@canton.de.