36
37
English
English
Bluetooth
®
connection via NFC
if your Bluetooth
®
enabled mobile device supports nFC technology, you
can use this to connect with your musicbox even more easily:
1
switch on the musicbox by pressing the power button .
2
activate the nFC function on your mobile device.
3
Press the Bluetooth
®
button on the musicbox (led flashes blue).
4
Place the mobile device with the nFC antenna on the nFC sensor of
the musicbox until a connection request appears on the display.
5
Remove the Bluetooth
®
device and confirm the connection request.
6
if you are asked for a password, enter the number “0000” and
confirm.
7
Your device is connected when the led is a steady blue and you hear
the voice message “Connected”.
AUX connection
if your mobile device has a lineOut or headphones output, it can be
connected with the musicbox via the auXin using an optional 3.5 mm
jack, as follows:
1
Plug the jack into the mobile device.
2
Plug the jack into the musicbox auXin.
3
switch on the musicbox by pressing the power button .
4
select the auX input .
5
Press Play on the mobile device.
6
in auX operation the volume is not synchronised between the music
box and the mobile device. to achieve the maximum possible volume,
turn the volume on the musicbox to maximum and select the desired
volume on the mobile device.
Note:
to reduce the power consumption of your musicbox,
the Bluetooth
®
connections in auX operation will be disconnected
automatically.
Note:
Before unplugging the jack from the mobile device once
you have finished playback, either lower the volume on the music
box or switch it off.
Note:
to disconnect the Bluetooth
®
connection via nFC place
your mobile device with the nFC antenna on the nFC sensor of the
musicbox until you hear the voice message “disconnected”. this
function may not be fully supported, depending on the individual
device.
3,5 mm jack
Mobile
device
musicbox
AUX
PLAY
4.
3.
2.
1.
Near-Field-Communication
4.
1.
2.
3.
Bluetooth
®
connection via NFC
AUX connection
