31
Deutsch
English
Setting up the DIGITAL MOVIE
Once your DM system has been successfully connected you need to
adjust the individual components to suit the enviroment.
To adjust the DM system, turn it on and press the button for
about 3 seconds. The LED „Set“ will start to flash. You can then use
the relevant buttons (spk level, spk delay, bass exp…) to activate the
desired functions. The values within each function can be adjusted up
or down using the –setup+ buttons.
To leave the Setup press one of the input buttons, press the
button again or wait until the remote control goes into standby after
approx. 30 seconds.
DM70_Manual2008.pmd
09.10.2008, 12:04
31
