27
Deutsch
English
Positioning the loudspeaker
The DM loudspeaker should be positioned above or below the television set. A flat screen can be placed directly on top of the DM 70.
Connecting source devices
The Canton DM system offers a multitude of connection possibilities for all current audio sources, such as DVD players, video recorders, satellite
receivers, multimedia consoles (Playstation®, X-Box®, ...) etc. The audio connections of your audio source devices can be connected to the
relevant inputs on the rear of the DM 70 (DVD to DVD, SAT to SAT, etc. ...). Audio sources that have a digital output for Dolby Digital and DTS
Bitstreams can also be digitally connected to the DM system. This ensures full Dolby Digital and DTS sound quality.
The video signal connections are made directly between the audio source devices and the image playback device. The required image source
is selected using the Menu of the image playback device (3).
A digital satellite receiver can be connected to the DM system via an optical or a coaxial digital input. The required input must be selected using
the slide switch (OPT/COAX) on the rear of the DM 70.
The
PRE-OUT 2.1/5.1 Mode
output allows devices such as active wireless loudspeakers to be connected. Depending on the chosen preset setting
(Page 37) in 2.1 Mode the front channels and in 5.1 Mode the surround channels are used.
The
Sub Out
can be used for the connection of an optional available
active subwoofer.
Note: When connecting an active subwoofer to the DM 70 go to
„Speaker Setup“ and set the volume of the subwoofer at -6 dB.
Increase the level on the subwoofer itself to 6 dB.
Further information on Page 33.
DM70_Manual2008.pmd
09.10.2008, 12:04
27
