7
UNPACKING AND CLEAN-UP
To ensure maximum performance from your planer, clean it properly, and install it accurately before use. As soon as
you receive the planer, we recommend you follow the procedures:
1.
Inspect packing crate for damage in transit. Record damage and report it immediately to shipper.
2.
Open crate and check that machine arrived in good condition. If not, let the distributor know immediately.
3.
Before lifting machine, remove all bolts from its shipping base.
4.
Transport machine to location with a hand truck or dolly.
5.
** IMPORTANT **
REMOVE THE PROTECTIVE COATING FROM THE TABLE, TABLE ROLLERS, FEED ROLLERS, CUTTERHEAD
AND LOOSE ITEMS PACKED WITH THE MACHINE.
6.
The coating may be removed with a soft cloth moistened with Kerosene.
NOTE: DO NOT USE ACETONE, GASOLINE, OR LACQUER THINNER FOR THIS PURPOSE
7.
DO NOT use solvents on plastic parts; they will dissolve plastic.
8.
** CAUTION **
CARE MUST BE TAKEN WHEN CLEANING THE CUTTERHEAD. The knives are in the cutterhead and are very
sharp.
9.
For lifting, please refer to Fig. 1
Fig. 1