5
Packing: outside measurement
Base Dimension
GENERALSAFETY INSTRUCTIONS
1.
Keep Guards In Place:
Safety guards must be kept in place and in working order.
2.
Remove Adjusting Keys And Wrenches:
Before turning on machine, check to see that the keys, chucks and
adjusting wrenches are removed.
3.
Reduce The Risk Of Unintentional Starting:
Make sure switch is in the off position before plugging in the
machine.
4.
Do Not Force Machines:
They will do a job better and safer at the rate for which they were designed.
5.
Use Right Tool:
Do not force a machine or an attachment to do a job for which it was not designed.
6.
Secure Work:
Use clamps or a vise to hold work when practical. It's safer than using your hand and it frees both
hands to operate machines.
7.
Maintain Machines With Care:
Keep machines sharp and clean for the best and safest performance. Follow
instructions for lubricating and changing accessories.
8.
Disconnect Machines From Power:
Before servicing or when changing accessories such as bits, blades,
cutters, etc.disconnect from power.
9.
Use Recommended Accessories:
Consult the owner's manual for recommended accessories. The use of
improper accessories may cause risk of injuries.
10.
Check Damaged Parts:
Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other conditions that may affect the machine's operation. A guard or other part that is
damaged should be properly repaired or replaced.
11.
Turn Power Off:
NEVER LEAVE MACHINE RUNNING UNATTENDED. Do not leave machine until it comes to a
complete stop.
12.
Keep Work Area Clean:
Cluttered areas and benches invite accidents.
13.
Do Not Use In Dangerous Environment:
Do not use power machinesin damp or wet locations, or expose
them to rain. Keep work area well lighted.
14.
Keep Children Away:
All visitors should be kept at a safe distance from the work area.
15.
Make Workshop Child Proof:
Use padlocks, master switches, and remove starter keys.
16.
Wear Proper Apparel:
Loose clothing, gloves, neckties, rings, bracelets or other jewelry may get caught in
moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain long hair.
17.
Always Use Safety Glasses And Dust Masks:
Use face or dust mask if cutting operation is dusty. Every day
eyeglasses only have impact resistant lenses, they ARE NOT safety at all times.
