cantaport PJR Series, Manual

Page: 9 / 11

METAL SLEE VES DETAILS
FOO
TING DE
TAILS
PIT FOO
TING 900 x 900 x 900
PILE FOO
TING 450 x 1500
BMS 450
CONCRE
TE DRIVE
W
AY
BASEPLA
TE ME
TAL SLEE
VE
SMS65 ST
AND
ARD ME
TAL SLEE
VE
ST
AND
ARD PIT FOO
TING
900x900x900
PILE FOO
TING
450x1500
STEEL SLEEVE (MIN G350) AS
SH
O
WN.
FIX
TO ME
TAL SLEE
VE
WITH
2xM16 8.8/S BOL
TS M
AX
100mm FR
OM ENDS
STEEL SLEEVE (MIN G350) AS
SH
O
WN.
FIX
TO ME
TAL SLEE
VE
WITH
2xM16 8.8/S BOL
TS M
AX
100mm FR
OM ENDS
FOO
TING DE
TAILS
PIT FOO
TING 900 x 900 x 900
PILE FOO
TING 450 x 1500
BMS450
SMS65
METAL SLEEVE ADVANTAGE: 1. Eliminates error in height. The metal sleeves are inserted into the concrete footing and extend above ground level. The cantaport posts then slide over the metal sleeves. The height of the posts can then be adjusted by cutting from the base of the post. Once the height is determined, the post is fixed using two bolts on the front and or rear of the post. 2. Assists with unlevel sites, extra height extension, 3. Provides further support to the structure and 4. The cantaport can be relocated, removed if required. A non permanent structure.