Via Wireless Lock
Installation Manual
July 2018 • Rev. 1.3
Page
of
8
20
10. REMOVE INSIDE TRIM
Use lever catch tool to depress lever catch visible under hole of inside lever shank and slide off inside lever, rose
liner and mounting plate.
11. ADJUST DOOR THICKNESS
12. INSTALL OUTSIDE LEVER ASSEMBLY
Remove outside mounting plate toward cylindrical
case.
Put the catch tool into the allocated position of
outside mounting plate as the illustration below.
Rotate outside mounting plate to required door
thickness by using a catch tool.
Install outside lever assembly on the door. Make
sure tail of latch is engaging with retractor correctly
as illustrated.
a.
b.
c.
