H1000
Page 5 of 45
Installation Manual
Oct 2015 • Rev. 2.6
Specifications
Suggested Cansec Power Supply
CA-PS123A ………………………………………………………………
12VDC/2A (see Note 1)
H1000 Controller Power Requirements (No Readers Attached)
Maximum Current
H1000 Controller (all Relays, LEDs ON)………………… 330ma
Maximum Current H1000 Controller (all Relays, LEDs ON) …250ma
(see Note 2)
H1000 Controller Idle Operating Current
H1000 Controller (standard operating)………………………………….………………. 90ma
H1000 Controller (standard operating)………………………………..… 40ma
(see Note 2)
Temperature Range
Operating ……………………………………………………………………………… -20˚C to 60˚C
Storage (without lithium battery) ……………………………………………
-
40˚C to 105˚C
Relative Humidity
Operating ………………………………………………………..……………………… 20% to 80%
Auto Resettable Fuses
H1000 Main 12V DC………………………………………………………………………………1 A
Each Reader Pair …………………………………………………………………………………… 1 A
Output Relays
(See Note 3 for 6 Amp Relay Rating)
Lock (2 per panel) …………………………………………………………SPDT 6 A @ 30 VDC
Alarm Shunt
……………………………………………………………… SPDT 6 A @ 30 VDC
Door Held Open
………………………………………………………… SPDT 6 A @ 30 VDC
Forced Entry (2 each per panel)
…………………………………… SPDT 6 A @ 30 VDC
Onboard I/O (8 outputs) ………………………………………………SPDT 6 A @ 30 VDC
