Canon ZR60 A, Service Manual

Page: 80 / 241

ZR70 MC A, ZR65 MC A, ZR60 A
CHAPTER 1. GENERAL DESCRIPTION OF PRODUCT
1-77
7-14 Analog/Digital Signal Conversion
This function can be used as an A/D conversion function for inputting an analog AV signal from an analog device to a PC.
7-14-1 A/D Signal Conversion Pocedure
(1) Connect the output terminal of the analog device with the analog terminal of the camcorder using STV-250N (or using S-1 50 if
necessary). Also connect the DV terminal of the camcorder with the DV terminal on the PC using CV-250F or CV-1 50F.
(2) Move the camcorder's power switch to [VCR] and move the Tape/Card switch to “Tape”, setting the operating mode to Stop mode
without inserting a tape.
(3) Select this function (A/D signal conversion) from the VCR setting item on the menu. Specifically, set “AV input
→
DV output” to
“ON”.
(4) Open the motion video acquisition software program on the PC and output the analog AV signal from the analog device.
The analog AV signal from the analog device is converted by the camcorder to a digital signal (DV signal). The PC can then acquire
the video and audio from the analog device, making it possible to record motion video and still images as needed.
7-14-2 CGMS
• A/D signal conversion for both DV input and analog input is only possible when there is no copy protection (CGMS = 00).
• If a value other than “00” is detected for CGMS, then the A/D signal conversion function is closed, the LCD panel/CVF changes
to blue background, the audio output is muted, and the following warning message is displayed: “COPYRIGHT PROTECTED
DUBBING RESTRICTED”.
7-15 Multi Switch
VCR operations and various settings can be performed in this mode.
When the Switch is Turned
When Setting Switch is Pushed
Multi-switch Mode Operated Function When switch is turned upward
During menu selection Item selection The cursor moves up.
Menu During LCD brightness adjustment Brightness adjustment The LCD screen grows brighter.
During card mix level adjustment Mix level adjustment The mix level range becomes smaller.
(ZR70 MC A, ZR65 MC A)
During AE shift AE level correction The iris value is increased.
During manual focus Focus adjustment The focus moves closer.
During VCR mode Speaker/headphone volume adjustment The volume increases.
During playback zoom Movement of display frame Frame moves up (to the right).
Multi switch mode Operated function When Setting switch is pushed
Shooting pause Open/close Program AE menu Program AE mode selection.
(sets selected settings)
In Digital Effects mode Digital Effects mode selection switch Digital Effects mode is selected.
When menu is displayed Menu item setting switch The item is selected.
During playback zoom Toggles direction of frame movement The direction of frame movement is selected.
(left-right/up-down)