Canon ZR60 A, Service Manual

Page: 141 / 241

ZR70 MC A, ZR65 MC A, ZR60 A
CHAPTER 4. DISASSEMBLING ADJUSTMENT
4-6
1-6 Separation of Jack P.C.B
(1) Remove two screws (b
×
2), disconnect the CN5, CN2101 and CN6 and detach the Jack P.C.B.
(2) Open the Cassette Cover and remove one screw (c
×
1). Pull the part A to this side while lifting it, disengage the two claw parts B
and detach the C Lock Plate Unit.
(3) Remove two screws (b
×
2) and detach the Tripod Base, C Lock Plate and Support Plate.
<Note on Reassembling>
(1) When reassembling the C Lock Plate Unit, insert the part C into the hole and reverse the disassembling procedures (2). Make sure
that the two Dowels are connected.
Fig. 4-5
3mm
Metal
M1.7
b
4mm
Metal
M1.7
c
JACK P.C.B.
(2)
(1)
(1)
(1)
(3)
(2)
CN2101
CN6
CN5
Tripod Base
Dowels B
Pull this part frontward.
Lift it.
C Lock Plate
C Lock Plate Unit
Support Plate
(1) - b
(2) - c
(1) - b
(3) - b
Part A
Part C