Canon ZR60 A, Service Manual

Page: 74 / 241

ZR70 MC A, ZR65 MC A, ZR60 A
CHAPTER 1. GENERAL DESCRIPTION OF PRODUCT
1-71
7-3 Headphones and Speaker
• In Camera mode and Camera/Card mode, the speaker is OFF.
• The speakers are on during normal card playback in the VCR mode. The Multi switch is used to adjust the volume.
• Headphone volume can only be controlled when headphones are selected in the menu. The volume is controlled using the Multi
switch.
• The speaker is OFF when headphones are selected in the menu.
7-4 Battery Indicator, Low-Power Warning, and Low-Power Shutoff
Battery Indicator
• When a battery is used, the battery indicator is displayed at one of five levels (100%, 75%, 50%, 25%, 0% (approximate)). These
levels indicate the amount of power remaining before the low-power warning indicator appears. The battery indicator is reset
when the power is turned off. Thus if the voltage is restored while the power is off, the battery indicator level may increase when
the power is turned back on. However, if the low-power warning appears, it will still be displayed even if the voltage is restored
when the power is turned on and off.
• When an AC adapter is used, the battery indicator is not displayed. However, the low-power warning is displayed if the voltage
drops below the low-power warning level due to an abnormality. When the voltage is restored above the low-power warning
level, the low-power warning disappears.
• The low-power warning is displayed when the battery terminal voltage falls to approx. 6.3 V or less (for this product).
7-5 System Data Displays
* The time code display reads “-.- -:- -:- -” when no tape is inserted or when the camcorder is at an unrecorded tape position.
* CGMS : If the data is copy-protected, it is not output to LINE OUT or the CVF (panel).
7-6 Data Code Display
Data codes can be used to turn the display ON/OFF independently (i.e., regardless of the ON/OFF status of other On Screen
character displays).
7-7 MP Tape Support
LP recording onto MP tape is not possible. When a tape is loaded with LP selected on the menu, the setting is automatically
switched to SP. During playback, the tape is played in LP if it was recorded in LP.
Camera Mode VCR Mode
Camera Screen REC Search DIF Input Blue Background
PB
(including Superb Playback)
Data code (timestamp) × × × - - - × - - -
●
Data code (camera data) × × × F - - - etc. × F - - - etc.
●
Time code
● ● ● ● ●
Main unit
Audio mode (12/16 bit)
●
×
●
×
●
4-second display DIF side
Wide/Normal
●
×
●
×
●
Setting display DIF side
CGMS (warning) ×
● ●
×
●
DIF side
SP/LP
● ● ● ● ●
Setting display Setting display Setting display