130
PRINTER ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status.
PRINT ERROR
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the
button, check the print settings.
HARDWARE ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status.
RECHARGE THE
PRINTER BATTERY
The printer battery is depleted.
COMMUNICATION
ERROR
The printer is experiencing a data transmission error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable.
When you are printing using the
button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
CHECK PRINT
SETTINGS
The print setting cannot be used for printing with the
button.
PRINTER IN USE
The printer is in use. Check the printer status.
PRINTER WARMING UP
Printer is warming up. If the message does not disappear after a few
seconds, check the printer status.
PAPER LEVER ERROR
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
PRINTER COVER OPEN
Close the printer cover securely.
NO PRINTHEAD
No print head is installed in the printer or print head is defect. Refer to the
instruction manual of your printer.
Message
Explanation
Summary of Contents for ZR400
Page 151: ......
