Canon ZR400 Instruction Manual Download

Page: 16 / 152

Loading/Unloading a Cassette

Use only videocassettes marked with the

logo.

1. Slide the OPEN/EJECT switch and

open the cassette compartment
cover.

The cassette compartment opens
automatically.

2. Load/unload the cassette.

• Load the cassette with the window

facing the grip belt.

• Unload the cassette by pulling it straight

out.

3. Press the

mark on the

cassette compartment until it
clicks.

4. Wait for the cassette compartment

to retract automatically and close
the cassette compartment cover.

Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment
has fully retracted.

Be careful not to get your fingers caught in the cassette compartment cover.

If the camcorder is connected to a power source, cassettes can be loaded/
unloaded even if the POWER switch is set to OFF.

Tape protection tab

Summary of Contents for ZR400

























































































































































Search results

Summary of Contents for ZR400

Reviews:

Related manuals for ZR400

Brands by name

Popular brands

Canon ZR400, Instruction Manual

Search results

Summary of Contents for ZR400

Reviews:

Related manuals for ZR400

Brands by name

Popular brands