Canon ZR400 Instruction Manual Download

Page: 66 / 152

Playback

Magnifying the Image

The playback image can be magnified up to 5 times.

1. Move the zoom lever toward

• The image is magnified by 2 times.
• A frame appears indicating the position of the magnified area.
• To further enlarge the image, move the zoom lever toward

To shrink the image below 2 times magnification, move the
zoom lever toward

2. Select the magnified area with the SET dial.

• Turn the SET dial to move the image to the right and left, or up

and down. Pressing the SET dial switches between the
directions.

• To cancel the magnification, move the zoom lever toward

until the frame disappears.

Movies played back from a memory card cannot be magnified.

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

Zoom lever

SET dial

Summary of Contents for ZR400

























































































































































Search results

Summary of Contents for ZR400

Reviews:

Related manuals for ZR400

Brands by name

Popular brands

Canon ZR400, Instruction Manual

Search results

Summary of Contents for ZR400

Reviews:

Related manuals for ZR400

Brands by name

Popular brands