Canon Z5000, Configuration Manual

Page: 45 / 168

3
3-9 Network Setup options
Jobs Saved in Printed Queue
1-99 [10]
This option appears only if Enable Printed Queue is set to Yes. Specify the number of
jobs to be stored in the Printed queue. Jobs in the Printed queue take up space on the
ColorPASS hard disk. If disk space is low, use a smaller value for saved jobs.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.
Network Setup options
Network Setup configures the ColorPASS to receive print jobs over the network
systems that will be used at your site.
If the ColorPASS is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job.
In the Setup menu, choose Network Setup, where you specify network addresses
and names to be used by workstations, servers, and the ColorPASS when they
communicate with each other.
The Network Setup menu includes three submenus that let you choose port types,
protocols, and network services. You must perform Port Setup and enable at least one
port.
For each item you enable, you are prompted to enter settings for that item. Default
values, where applicable, appear in this manual with square brackets.
You need to display and select options only for the network systems that are currently
used at your site. If your network requirements change, you can change Network
Setup at any time.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Exit Network Setup
Port Setup
Protocol Setup
Service Setup
Network Setup