Canon Z5000, Configuration Manual

Page: 121 / 168

5
5-1 Support for Fiery utilities
This chapter describes environments that typically include one or more network
servers—Novell NetWare servers and Windows NT 4.0 servers—that share printing to
the ColorPASS. It describes setting up servers that use IPX/SPX or TCP/IP protocols
for communicating with the ColorPASS. In addition, it includes guidelines for setting
up direct communication from Windows NT 4.0 workstations, Windows 2000, or
UNIX workstations, where a network server is optional. The chapter also outlines the
requirements for users to print to the ColorPASS and to run the Fiery utilities and
Fiery WebTools.
The ColorPASS can accept jobs concurrently from NetWare, Windows NT 4.0, and
AppleShare servers, as well as jobs sent directly from Windows NT 4.0 or UNIX
workstations. Because AppleShare servers require no special configuration, they are not
discussed in this chapter, except for use in a Windows NT 4.0 environment (see
“ColorPASS on a TCP/IP network with Windows NT 4.0” on page 5-11).
If your network is based on Windows NT 4.0, proceed to page 5-11. For information
on UNIX workstations, proceed to page 5-18.
Support for Fiery utilities
The following table describes the Fiery utilities supported over each protocol and
Windows platform. More information is provided in later sections, according to your
network type.
Fiery utility:
Windows 95/98/Me
IPX:
Windows 95/98/Me
TCP/IP:
Windows NT 4.0/
2000
IPX:
Windows NT 4.0/
2000
TCP/IP:
ColorWise Pro Tools —
√
—
√
Command WorkStation —
√
—
√
Fiery Downloader —
√
—
√
Fiery Scan —
√
—
√
Chapter 5:
Setting up
Network Servers