Canon WUX500ST, Manual

Page: 6 / 18

WUX500ST (6/18)
3. Video Signals
3-1. List of supported signals
The video signals that can be input in this product are described in the tables below.
●DVI input (Digital PC) ●HDMI input (Digital PC, digital video)
Signal
format
Frequency
Dot clock
[MHz]
Signal format
Frequency
Dot clock
[MHz]
Horizontal
[kHz]
Vertical
[Hz]
Horizontal
[kHz]
Vertical
[Hz]
640×480 31.469 59.940 25.175
640×480 31.469 59.940 25.175
720×480 31.469 59.940 27.000 800×600 37.879 60.317 40.000
720×576 31.250 50.000 27.000 1024×768 48.363 60.004 65.000
800×600 37.879 60.317 40.000 1280×800 49.702 59.810 83.500
1024×768 48.363 60.004 65.000 49.306 59.910 71.000
1280×720 37.500 50.000 74.250 1280×1024 63.981 60.020 108.000
45.000 60.000 74.250 1366×768 47.712 59.790 85.500
1280×800 49.702 59.810 83.500 1400×1050 64.744 59.948 101.000
49.306 59.910 71.000 65.317 59.978 121.750
1280×1024 63.981 60.020 108.000 1440×900 55.935 59.887 106.500
1366×768 47.712 59.790 85.500 55.469 59.901 88.750
1400×1050 64.744 59.948 101.000 1600×900 60.000 60.000 108.000
65.317 59.978 121.750 1600×1200 75.000 60.000 162.000
1440×900 55.935 59.887 106.500 1680×1050 64.674 59.883 119.000
55.469 59.901 88.750 65.290 59.954 146.250
1600×900 60.000 60.000 108.000 1920×1200 74.038 59.950 154.000
1600×1200 75.000 60.000 162.000
1680×1050 64.674 59.883 119.000 480p 31.469 59.940 27.000
65.290 59.954 146.250 576p 31.250 50.000 27.000
1920×1080 27.000 24.000 74.250 720p 37.500 50.000 74.250
56.250 50.000 148.500 45.000 60.000 74.250
67.500 60.000 148.500 1080i 28.125 50.000 74.250
1920×1200 74.038 59.950 154.000 33.750 60.000 74.250
1920×1080 27.000 24.000 74.25 1080p 27.000 24.000 74.250
PsF 28.125 25.000 74.25 56.250 50.000 148.500
33.750 30.000 74.25 67.500 60.000 148.500
●HDBaseT input
Signals that are transmitted can be displayed in the same resolution and frequencies as the
HDMI input as shown in the above chart.
HDBaseT signals are signals specified by the HDBaseT standards.
The signal is transmitted as HDBaseT signal through the cable and converted to HDMI signal when inputted
to the projector.
Proper display is not guaranteed when receiving HDBaseT signal that cannot be converted back to any of the
HDMI signal listed above.
Notes: Always use STP cable that is above CAT5e specified by the TIA (Telecommunications Industry Association) of the
United States. The length of 100 meters contains the length of patch cable and connectors. However, proper projection performance
may not be achieved even within the specified distance, depending on the type of cable used and installation conditions.