WUX500ST (14/18)
●Terminals
⑥
⑩
⑦
①
③
②
⑧
④
⑤
⑨
Terminal
Signal
Video input
①
DVI-I
Digital PC/Analog PC1
②
HDMI
HDMI (with audio)
③
Mini Dsub15
Analog PC2/Component video
④
RJ-45 (HDBaseT)
HDBaseT input
Audio input
⑤
Mini jack x2
Stereo audio x2
Audio output
⑥
Mini jack
Stereo audio
Control
⑦
USB type A
USB connection
⑧
RJ-45
1000BASE-T/100BASE-TX / 10BASE-T
⑨
Dsub9
RS-232C connection
⑩
Mini jack
Wired remote control connection
●Wired remote control connection
The WUX500ST can be operated from optional remote control RS-RC05 via wired
connection.
When a cable is connected to a mini jack terminal for wire remote control, the projector
will automatically disable its infrared wireless remote control mode. In this mode, the
projector can only be operated from the wired remote control.
The remote control will also disable its infrared wireless remote control mode.
There is no need to configure the remote control channel settings for wired remote
control connection.
Note that when the wired remote control is physically connected but disconnected
owing to cable malfunction or breakage, remote operation will be disabled from all
remote controllers.
●Screw holes for ceiling mount: 4 locations (M6)