Canon WFT-E8, Instruction Manual

Page: 91 / 152

91
Using the Transmitter with WFT Server
1
Set up the slave cameras.

Perform steps 1 to 6 on page 84 for
the cameras to use as slaves. When
the next screen is displayed, the
slave cameras are ready.
2
Set up the master camera.

Perform steps 1 to 5 on page 84 for
the camera to use as the master, then
select [
Master ].

Select [ OK ] and press <
0
> to go to
the next screen.
3
Select [Manual connect].

Select [ OK ] and press <
0
> to go to
the next screen.
4
Select connection method.

Select the wireless LAN ad hoc mode
supported by the computer.

Select [ OK ] and press <
0
> to go to
the next screen.
5
Specify the channel.

When selecting [ Manual setting ],
specify the same channel on the
master camera, slave cameras, and
computer.

Select [ OK ] and press <
0
> to go to
the next screen.
Connecting the Master and Slave Cameras