Canon WFT-E8, Instruction Manual

Page: 128 / 152

128
Responding to Error Messages
What to check on the FTP server

The connection was terminated by the FTP server.
 Restart the FTP server.

Do the user rights for the FTP server allow reading, writing,
and log access?
 Configure the FTP server’s user rights to allow reading, writing,
and log access.

Do user rights allow access to the target folder on the FTP
server?
 Configure the user rights for access to the target folder on the FTP
server to allow saving images from the transmitter.

Is the power of the FTP server on?
 Turn on the FTP server. The server may have been turned off
because of an energy-saving mode.

Is the hard disk of the FTP server full?
 Increase available space on the hard disk.

This error occurs if, for some reason, the transmitter fails to
receive confirmation from the FTP server that image file
transfer is complete.
 Turn off and on the FTP server and camera, then transfer the
images again.
46: For the data session, error code received from FTP
server
47: Image file transfer completion not confirmed by
FTP server