3
Part Names
2
3
1
4
7
6
5
8
9
10
13 12 11
14
1. Microphone
2. Camera head
3. Top cover
4. Top cover lock screw
5. Audio output terminal (P. 15)
6. External device I/O terminal (P. 13)
7. 100Base-TX LAN Connector (P. 13)
8. Safety wire attachment
9. Label
*1
10. Vent
11. LED
*3
12. Memory card slot
13. Reset switch
*2
14. Rating label
*1 :
It is recommended to write down the serial number and MAC address before
installing the camera.
*2 : Please refer to the “Operation Guide” for the method to reset the camera.
*3 : LED
LED
Status
On
When powered on, during reboot, during normal use (when set to “ON”*)
Blinking Updating the firmware, or initializing settings
Off
Lights up for a few seconds at startup, then turns off (when set to “OFF”*)
* Refer to “Operation Guide”
