20
Safety Precautions
Important
• Installation of a lightning arrester (a surge protection device) is recommended as a
measure against failures caused by lightning strikes.
• Do not turn the camera rotator by hand.
• Do not install the camera on an unstable surface.
• Make sure the camera is installed ±5° or less from the horizontal position.
• After turning off the power, do not turn the power on again for at least five
seconds.
• Take measures to remove static electricity before performing any procedures.
• If there is condensation, wait to power on until the condensation dissipates.
• If installing outdoors, take measures on waterproofing and dust proofing.
