2-14
Step 3 Perform Initial Setting of the Camera
3.
The viewer starts and video captured by the camera is displayed.
This completes the video check process.
Note
Clicking [
Setting Page
] or [
Admin Viewer
] on the top page of the camera displays each
user authentication window.
The factory setting user name and password are as follows:
User name:
root
Password:
VB-C60
Authentication Window Accessed via Setting Page
Authentication Window Accessed via Admin Viewer
Be sure to change the administrator password for security reasons. See "Administrator
Password" (
Operation Guide
).
To display both JPEG and MPEG-4 video, install and use VK-Lite Viewer ( P. 1-8).
Where video can be transmitted to is not limited by the factory settings, etc. To use the
camera for surveillance purposes, etc., be sure to set the [
Access Control
] options on the
Setting Page. See "Setting User Access Privileges (Access Control)" (
Operation Guide
).
Tip
For information on how to use VB-C60 Viewer, see
Operation Guide
.
When [
Setting Page
] is clicked, various options can be set. See "Accessing the Setting
Menu" (
Operation Guide
).
COP
Y