Canon VB-C50FSi User Manual Download

Page: 214 / 238

7-6

Message

Explanation

●

A023 Detection in change of point of contact (err)

a %1 detected at In%2

point of contact device input change (front-edge | rear-edge | pulse | notch)

Point of contact input terminal number (1 to 2)

A change was detected at point of contact device terminal In1 or In2.
front-edge denotes OFF

→

ON, rear-edge denotes ON

→

OFF, pulse

denotes OFF

→

OFF, and notch denotes ON

→

OFF

→

ON. pulse

and notch are brief (10-20 milliseconds) ON and OFF periods detected
during OFF and ON states respectively.

Message

Explanation

Response

●

A022 Applet archive load failure (warning)

archive/%1 not found

Applet archive file does not exist or is corrupted.

Copy the missing (or damaged) file in the '/archive' applet from the CD-ROM
and reboot.

Log Messages

Message

Explanation

●

A015 WebView Administrator Viewer start (info)

%1@%2 privilege granted

The WebView Administrator Viewer has started operation.

Type of clients (LS/C | LS/D)

Client host IP address

Message

●

A016 Amount of transmitted video data (info)

%1@%2 %3 frames / %4 bytes in %5 seconds

Number of frames

Client type (LS/D | LS/H)

Client host IP address

Explanation

This shows the results of video transmission for a video transmission client.

Number of bytes

Video transmission time

Summary of Contents for VB-C50FSi















































































































































































































































Search results

Summary of Contents for VB-C50FSi

Reviews:

Related manuals for VB-C50FSi

Brands by name

Popular brands

Canon VB-C50FSi, User Manual

Search results

Summary of Contents for VB-C50FSi

Reviews:

Related manuals for VB-C50FSi

Brands by name

Popular brands