2-5
Installing the Camera
Connect the Camera to the Network and Perform the Initial Setting
Note
●
Please ask our sales person for PoE HUB and Midspan.
●
Read the manual of the PoE HUB or Midspan for how to use it.
●
Up to 100 m of the LAN cable can be connected between the camera and the PoE
HUB.
●
Use a shielded LAN (Categrory 5 or above) cable for VB-C300 connection.
●
If the camera is connected to a switching HUB and connection is changed while
the camera is operating, the learning capability of the HUB may disturb the
communication. Do not change connection while the camera is operating.
Turning the Power ON and OFF
The VB-C300 itself does not have a power switch.
If the power is supplied to the VB-C300 via a LAN cable using the PoE function, connect and
disconnect the LAN cable from the camera to an operating HUB to turn the power ON and OFF.
When using the AC adapter (optional) or external power supply, the camera is powered ON by
plugging the AC adapter (optional) or external power supply.
When using PoE HUB
LAN cable
PoE HUB
VB-C300
When using the AC Adapter (Optional) or external power supply
AC power cable
AC Adapter
VB-C300
100-240VAC 50/60Hz
The figure shows the AC adapter (optional).
Summary of Contents for VB-C300
Page 14: ...xiv...
Page 53: ...3 7 Appendix...
