Canon VB-730F Mk II, Operation Manual

Page: 77 / 242

Setting Page
5
77
Common Setting Page Operations
This section explains basic Setting Page operations, and operations common to all Setting Pages.
Note
If you have enabled settings in your web browser to not display dialog boxes, you may be unable to perform operations on the Setting
Page. If this happens, exit your web browser and launch it again.

Applying Changes to Settings
If you change a setting on the Setting Page, the [Apply] and [Clear] buttons on the upper right or lower right of the
screen is no longer grayed out and can be clicked.
Click [Apply] in this state to apply the changed settings.
Click [Clear] to revert to the previous settings.

Setting Changes Requiring Rebooting
Items that require the camera to be rebooted in order to apply the changed settings are indicated with an orange
symbol to their right.
When any item indicated with an orange symbol is changed, [Apply] displayed at the upper right and lower right of
each Setting Page changes to [Apply and reboot].
Click [Apply and reboot] to apply the changed settings and reboot the camera.
Click [Clear] to revert to the previous settings.

Return to the Settings Menu
Click [Settings Menu] at the upper right of each Setting Page to return to the setting menu.
Important
• If you open another window or tab to access the camera while an authenticated web page is displayed, the authentication
information of the displayed web page may be discarded. In this case, enter the authentication information again.
• To ensure security, exit the web browser after completing settings on the Setting Page and after using the Camera Viewer.
• Do not open multiple Setting Pages at one time and try to change the settings of a single camera.
Important
Setting changes will be lost if you navigate to another Setting Page without clicking [Apply] or [Apply and reboot]. Be sure to click
[Apply] or [Apply and reboot] to apply the changed settings. However, changes for [Initial Settings] are saved even if you navigate
to another page without clicking [Apply], so click [Clear] if you want to discard those settings.
Important
Do not use the [Back] or [Forward] buttons in the web browser to navigate Setting Pages. The changed settings may revert to the
original settings or unwanted setting changes may be applied.