Canon VB-730F Mk II Operation Manual Download Page 141

Page: 141 / 242

Setting Page

141

Settings for clients that can connect to a video server.

Video Server

[Maximum Number of Clients]

Enter the maximum number of clients that can be connected to the camera at the same time.

If set to [0], only administrators will be able to connect.

[Camera Control Queue Length]

Enter the maximum queue length for clients requesting camera control privileges from the Camera Viewer.

If set to [0], only administrators can queue for camera control.

[Maximum Connection Time (sec.)]

Enter the maximum time in seconds during which an individual client can connect to the camera.

If set to [0], the connection time is unlimited.

[Camera Control Time (sec.)]

Enter the maximum time Camera Viewer can retain camera control privileges.

[Server] > [Video Server]
Video Transmission Settings

Important

When there are many clients or they are connected to the camera over an SSL/TLS connection, the video frame rate may slow down and
the sound may drop out if audio reception from the camera is enabled.

The following settings can be configured here.

• Video Server

Summary of Contents for VB-730F Mk II



















































































































































































































































Search results

Summary of Contents for VB-730F Mk II

Reviews:

Related manuals for VB-730F Mk II

Brands by name

Popular brands

Canon VB-730F Mk II, Operation Manual

Search results

Summary of Contents for VB-730F Mk II

Reviews:

Related manuals for VB-730F Mk II

Brands by name

Popular brands