Canon TS7450i Series Online Manual Download Page 203

Page: 203 / 455

Scan Specifications

Scanner driver

Windows:

TWAIN 1.9 Specification, WIA

Maximum scanning size

Platen:

A4/Letter, 8.5 x 11.7 in. (216 x 297 mm)

ADF:

A4/Letter/Legal, 8.5 x 14.0 in. (216 x 356 mm)

Optical resolution (horizontal x
vertical)

1200 x 2400 dpi *

* Optical Resolution represents the maximum sampling rate based on ISO
14473.

Gradation (Input / Output)

Gray:

16 bit/8 bit

Color:

RGB each 16 bit/8 bit

Network Specifications

Communication protocol

SNMP, HTTP, TCP/IP (IPv4/IPv6)

Wi-Fi

Supported Standards:

IEEE802.11n / IEEE802.11g / IEEE802.11b

Frequency bandwidth:

2.4 GHz

Channel:

1-11 or 1-13

* Frequency bandwidth and available channels differ depending on country or
region.

Communication distance:

Indoors 164 feet/50 m

* Effective range varies depending on the installation environment and location.

Security:

WEP (64/128 bits)

WPA-PSK (TKIP/AES)

WPA2-PSK (TKIP/AES)

Setup:

WPS (Push button configuration/PIN code method)

Easy wireless connect

Minimum System Requirements

Conform to the operating system's requirements when higher than those given here.

Windows

Operating System

Windows 10, Windows 8.1, Windows 7 SP1

Note: Operation can only be guaranteed on a PC with pre-installed Windows
7 or later.

Amount of hard disk space re-
quired for installing the driver

1.5 GB or more

The necessary amount of hard disk space may be changed without notice.

203

Summary of Contents for TS7450i Series








































































































































































































































































































































































































































































Search results

Summary of Contents for TS7450i Series

Reviews:

Canon TS7450i Series, Online Manual, Page: 203 / 455

Search results

Summary of Contents for TS7450i Series

Reviews: