Canon TS7450i Series Online Manual Download Page 111

Page: 111 / 455

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.

Replace the FINE

•

cartridge

whose ink is low.

You need to prepare: a sheet of A4 or Letter-sized plain paper

Check that printer is turned on.

Load a sheet of A4 or Letter-sized plain paper in the cassette.

Loading Plain Paper in Cassette

Press the

button.

Select

Maintenance

Select

Nozzle Check

The confirmation screen will appear.

Select

Yes

Press the

button.

The nozzle check pattern will be printed and two pattern confirmation screens will appear on the LCD.

Select

Next

Examine the nozzle check pattern

111

Summary of Contents for TS7450i Series








































































































































































































































































































































































































































































Search results

Summary of Contents for TS7450i Series

Reviews:

Canon TS7450i Series, Online Manual, Page: 111 / 455

Search results

Summary of Contents for TS7450i Series

Reviews: