Canon TS7450i Series, Online Manual, Page: 190 / 455

Setting items when you use WSD (one of the network protocols supported in Windows).
◦ Enable/disable WSD ◦
Selects whether WSD is enabled or disabled.
Note
When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows.
◦ Optimize inbound WSD ◦
Selecting Enable allows you to receive the WSD printing data faster.
◦ Timeout setting ◦
Specifies the timeout length.
• Bonjour settings •
Setting items when you use Bonjour.
◦ Enable/disable Bonjour ◦
Selecting Enable allows you to use Bonjour to perform the network settings.
◦ Service name ◦
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
You cannot use the same service name as that already used for other LAN connected
devices.
• LPR protocol setting •
Enables/disables the LPR setting.
• RAW protocol •
Enables/disables RAW printing.
• LLMNR •
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer
to detect printer's IP address from the printer name without a DNS server.
• IPP settings •
Selecting Enable allows you to print via the network with the IPP protocol.
• PictBridge communication •
Setting items for printing from a PictBridge (Wi-Fi) compliant device.
◦ Enable/disable communication ◦
Selecting Enable allows you to print from a PictBridge (Wi-Fi) compliant device.
◦ Timeout setting ◦
Specifies the timeout length.
• IPsec settings •
190