5
5
Service Mode
Service Mode
5-2
5-2
Service Mode > Outline > Using Service Mode
Service Mode > Outline > Using Service Mode
Outline
Service Mode Composition
The Board's service mode consists of the following 10 items (#1 through #10):
Item
Name
Description
#1 SSSW
Service soft switch
Use it to register/set up functions related to basic fax
services (e.g., error management, echo remedies,
communication remedies).
#2 MENU
Menu switch setting
Use it to register/setup functions needed at time of
installation (e.g., NL equalizer, transmission level).
#3 NUM
Numeric parameter
settings
Use it to enter numeric parameters.
#4 NCU
Not to be used for
service work
All settings under the item will collectively set in response to
the #5 TYPE setting.
#5 TYPE
Country settings
Use it to cause the Board to automatically set data under
#4 NCU so that it complies with the communication
requirements of the country in question.
#6 ISDN
-
-
#7 PRINTER Printer functions setup Use it to register/set up functions related to basic printer
services (e.g., reduction for received images).
#8 CLEAR
Data initialization
Use it to reset various data to initial settings.
#9 TEST
Test mode
Use it to execute various tests.
#10 REPORT Service report
Use it to print out reports.
Caution:
#6 ISDN is not used in this machine.
T-5-1
Using Service Mode
1) Press the User Mode key "
" on the control panel.
2) Press the keys 2 and 8 on the keypad at the same time.
3) Press the User Mode key "
" on the control panel once again.
The machine will indicate the accessories that are connected to it (e.g., FEEDER, FAX,
BOARD).
Select [FAX] to use service mode items available for the Board.
COPIER
FEEDER
BOARD
FAX
SERVICE MODE
LEVEL 1
COPIER: service mode of the host machine.
FEEDER: service mode of the ADF. *
FAX: service mode of the fax. *
BOARD: service mode of an accessory board. *
*: Indicated only if installed.
F-5-1
