5
5
5-4
5-4
Adjustment > Dip Switch Function > Sensor Detection Check Mode > List of Sensor Detection Check States
Adjustment > Dip Switch Function > Sensor Detection Check Mode > List of Sensor Detection Check States
■
List of Sensor Detection Check States
By setting the DIP switch (SW1) according to the following table after entering the sensor detection check mode, you can check the sensor/switch detection state according to the illumination state of
the LED (LD1).
No.
DIP Switch (SW1) Setting
Name
LED (LD1) ON/OFF Condition
1
2
3
4
ON
OFF
1
OFF
ON
OFF
OFF Buffer Sensor (S1)
Paper present
Paper absent
2
ON
OFF
OFF
OFF Feed Path Sensor (S2)
Paper present
Paper absent
3
ON
OFF
ON
OFF Paddle HP Sensor (S3)
Home position detected
Other than home position
4
ON
ON
OFF
OFF Front Alignment Plate HP Sensor (S4)
Home position detected
Other than home position
5
OFF
OFF
ON
OFF Rear Alignment Plate HP Sensor (S5)
Home position detected
Other than home position
6
OFF
ON
OFF
ON
Tray Auxiliary Guide HP Sensor (S6)
Home position detected
Other than home position
7
OFF
ON
ON
OFF Gripper HP Sensor (S7)
Home position detected
Other than home position
8
ON
ON
ON
OFF Gripper Encoder Sensor (S8)
Sensor light blocked
Sensor light unblocked
9
ON
OFF
OFF
ON
Stack Tray Paper Height Sensor (S9)
Sensor light blocked (Stack position)
Sensor light unblocked
10
ON
OFF
ON
ON
Staple HP Sensor (S11)
Home position detected
Other than home position
11
OFF
OFF
ON
ON
Staple Edging Sensor (S12)
Staple present
Staple absent
12
ON
ON
OFF
ON
Staple Sensor (S13)
Staple absent
Staple present
13
OFF
OFF
OFF
ON
Staple Paper Detection Sensor (S14)
Paper present
Paper absent
14
OFF
OFF
OFF
OFF Buffer Path Cover_Open/Close Sensor (S16) (*)
Cover open
Cover closed
15
OFF
ON
ON
ON
Front Door Switch (SW1)
Front door open
Front door closed
16
ON
ON
ON
ON
Stack Tray Lower Limit Sensor (SW2)
Stack tray lower limit detected
Other than stack tray lower limit
* To check Buffer Path Cover Open/Close Sensor, turn on the host machine while pressing down the push switch (SW2).
T-5-1
Summary of Contents for Staple Finisher-S1
