4
4
4-27
4-27
Parts Replacement and Cleaning Procedure > Major Units > Removing the Finisher Lower Feed Guide Unit > Preparation
Parts Replacement and Cleaning Procedure > Major Units > Removing the Finisher Lower Feed Guide Unit > Preparation
4) Remove the Delivery Guide [1].
• 4 Screws [2]
4x
[1]
[2]
[2]
5) Remove the Front alignment plates [1] and Rear alignment plates[2].
• 2 Screws [3]
[1]
[2]
[3]
2x
F-4-64
F-4-65
Removing the Finisher Lower Feed Guide Unit
■
Preparation
1) Remove the Finisher Unit from the connected equipment(Refer to page 4-9).
2) Remove the Staple Cartridge(Refer to page 4-22).
3) Remove the Front Cover(Refer to page 4-15).
4) Remove the Rear Cover(Refer to page 4-16).
5) Remove the Upper Cover(Refer to page 4-17).
6) Remove the Paddle Motor (M3) (Refer to page 4-44).
7) Remove the Staple Unit(Refer to page 4-23).
8) Remove the Front Door Switch (S15) (Refer to page 4-53).
F-4-66
Summary of Contents for Staple Finisher-S1
