4-11
SmartBase MPC200/imageCLASS MPC200
Chapter 4: Maintenance & Service
"CARTRIDGE JAMMED"
Printing position correction failed
Cause:
Carriage movement prevented by one of the following.
Damaged shaft.
Parts deformed. (Carriage or guide frame)
Insufficient grease.
Solution:
Replace the shaft.
Replace the deformed parts.
Apply more grease.
Cause:
Bi-directional print displacement correction failed because the carriage motor
is out of step, or some similar reason.
Solution:
Replace the carriage motor.
Home position error
Cause:
Foreign body in carriage section.
Solution:
Open flatbed ass'y, and remove foreign body.
Cause:
Loose carriage belt.
Solution:
Replace carriage belt.
Cause:
Guide frame home position detection tabs is damaged or bent parts.
Solution:
Replace the damaged or bent parts.
Cause:
Carriage motor does not work.
Solution:
(1) Switch power OFF/ON.
(2) Replace carriage motor.
Cause:
The position of the carriage cannot be detected (due to smears on the carriage
encoder film or SPCNT board failure).
Solution:
(1) Switch power off/on.
(2) Wipe the carriage encoder film with a cloth soaked with alcohol.
(3) Replace the carriage unit.
(4) Replace the carriage encoder film.
(5) Replace the SPCNT board.
This error message means the same as service error codes ##338 and ##340. When this
error occurs in this model, it is not treated as a service error, but as a user error, and the
error message is displayed.
NOTE
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
