Canon SmartBase H12219, Fax Manual

Page: 72 / 82

9-6
* Even if you have set
INCOMING RING
to
ON
, ringing will only occur if you have connected a telephone
to your machine.
6. COLOUR DIRECT
TX
Enables/disables sending of colour documents from
the ADF to fax machines that do not have colour
faxing capability. (
→
p. 4-1)
OFF:
Colour documents cannot be sent to fax machines
that do not support colour faxing.
ON:
Colour documents can be sent to fax machines that
do not support colour faxing. (The document is
converted to black & white.)
OFF
ON
4. RX SETTINGS
1. ECM RX
Enables/disables Error Correction Mode (ECM)
during reception.
ON
OFF
2. FAX/TEL AUTO SW
When the machine is set to
FAX/TEL AUTO SW
,
you can set its details. (
→
p. 5-2)
-
1. RING START
TIME
Selects the time the machine takes to check whether
a call is from a fax machine or a telephone.
8 SEC
(0
to
30)
2. F/T RING TIME
Selects the length of time the machine rings when
the call is a voice call.
22 SEC
(10
to
60)
3. DEFAULT
ACTION
Sets whether the machine switches to receive mode
after the ring time set in
F/T RING TIME
has
elapsed.
RECEIVE
DISCONNECT
3. INCOMING RING
When the machine is set to
FAX ONLY MODE
or
FAX/TEL AUTO SW
enables/disables ringing
when the machine receives a call.*
OFF
ON
RING COUNT
Selects the number of incoming rings before the
machine begins receiving.
2 TIMES
(1
to
99)
4. MAN/AUTO SWITCH
When the machine is set to
MANUAL MODE
,
determines if the machine switches to fax receive
mode after it rings for a specified time.
OFF
ON
F/T RING TIME
If you select
ON
above, selects the length of time the
machine rings before switching to fax receive
mode.
15 SEC
(1
to
99)
Name Description Settings