50
Chapter 3 Handling
• The maximum thickness that can be scanned is 33.53 lb bond
(0.00591" (127 g/m
2
(0.15 mm))). If the thickness exceeds
33.53 lb bond (0.00591" (127 g/m
2
(0.15 mm))), the scanner
may break down due to problems such as paper jam.
• Depending on the condition of the carrier sheet, the scanned
image may be cut off and the scanner's correction functions
may not operate properly. In such cases, specify a larger
paper size (e.g., A4) in the [Page Size] setting.
• The carrier sheet is a consumable item. Replace it as
necessary, if there are visible scratches or smudges, for
example. The general replacement cycle for the carrier sheet
is about 1,000 scans involving a single sheet of 21 lb bond
(80 g/m
2
) paper per scan.
❏
Placing a Carrier Sheet for Passports
When scanning a passport, insert the passport into an
optional carrier sheet for passports before placing it in the
scanner.
1.
Set [Document type] to [Carrier sheet (passport
type)] in the Detailed Settings screen.
2.
Open the page of the passport that you want to scan
and insert it into the carrier sheet.
3.
Place the document with the side you want to scan
facing down.
Adjust the document guides on both sides of the document
after placing the document.
CAUTION
• If the carrier sheet and passport are not placed properly, paper
jams may occur or the document may not be scanned
properly.
• When [Carrier sheet (passport type)] is selected, [Double feed
detection by Ultrasonic] will be set to [OFF] automatically.
