Canon ScanFront 400 Instructions Manual Download Page 108

Page: 108 / 206

108

Chapter 5 Administrator Settings

❏

Registering New Users

You can register new users.

IMPORTANT

• When an authentication server

(see p. 140)

is used, users that

are logged in from an authentication server account are
registered automatically.

• If an e-mail address is registered for the authentication server

account, the e-mail address is also registered automatically.

• If an e-mail address is not registered for the authentication

server account, the e-mail address is not registered. Register
an e-mail address by editing the user settings

(see p. 114)

Press [Edit] - [New User].

The New User screen appears.

Enter the necessary information for each item, and
then press [OK].

Hint

• When a user is registered, the display of the ScanFront

scanner changes from the Home screen to the Login screen.

(See “Login Screen” on p. 59.)

Summary of Contents for ScanFront 400















































































































































































































Search results

Summary of Contents for ScanFront 400

Reviews:

Brands by name

Popular brands

Canon ScanFront 400, Instructions Manual

Search results

Summary of Contents for ScanFront 400

Reviews:

Brands by name

Popular brands