Canon Satera LBP-5600 User Manual Download Page 12

Page: 12 / 154

NOTE

When the printer is switching to the sleep mode, the

オンライン

indicator is off and

only the

印刷可

indicator comes on even if the printer is online. If the printer receives

data in the sleep mode, the sleep mode is released, the

オンライン

indicator comes

on, and the printer is ready to print.

Placing the Printer Offline

Set the printer to offline using the following procedure to prevent the printer from
receiving data from the computer and to set all options of the

セットアップ

menu.

Press [

オ

オン

ン

ンラ

ラ

ライ

イ

イン

ン

The

オンライン

indicator comes off, and the printer is available to be set by the

control panel.

IMPORTANT

•

If printing from the computer in offline, such as [

プリンタの準備ができていません

], and

[

プリンタが接続されていません

] message are displayed, and the printer cannot print.

•

The printer comes online automatically if left in the offline state for five minutes or
longer. If an error is occurring in the printer (the

メッセージ

indicator is on, or

numbers in the message is blinking), or the menu function, paper selection and
setting of the paper size are being operated, the printer cannot set to online
automatically.

オンライン

Summary of Contents for Satera LBP-5600



























































































































































Search results

Summary of Contents for Satera LBP-5600

Reviews:

Related manuals for Satera LBP-5600

Brands by name

Popular brands

Canon Satera LBP-5600, User Manual

Search results

Summary of Contents for Satera LBP-5600

Reviews:

Related manuals for Satera LBP-5600

Brands by name

Popular brands