Canon Satera LBP-3700 User Manual Download Page 97

Page: 97 / 114

IMPORTANT

•

Do not touch the black transfer roller. This may result in deterioration in print quality.

•

Be careful not to scratch the transparent sheet or peel it forcibly.

•

Do not use a cleaning agent such as mild detergent.

•

Be sure that no water or chipped paper is remaining on the transparent sheet or
transport roller.

•

Be sure to finish with wiping with a dry cloth. Water remaining inside the printer
may result in damage to the printer.

•

Do not touch the transport roller. This may result in misfeeds.

Take a new toner cartridge out of the protective bag.

Use scissors to open the protective bag so as not to damage the toner cartridge.

IMPORTANT

Keep the protective bag in which the cartridge came. This may be required when
taking out the toner cartridge for printer maintenance.

Summary of Contents for Satera LBP-3700



















































































































Search results

Summary of Contents for Satera LBP-3700

Reviews:

Related manuals for Satera LBP-3700

Brands by name

Popular brands

Canon Satera LBP-3700, User Manual

Search results

Summary of Contents for Satera LBP-3700

Reviews:

Related manuals for Satera LBP-3700

Brands by name

Popular brands